Congratulations to David Johnson on picking up the win in his new B mod!
All-new website for B2 Racing Components! Shop by departments, brands, and be sure to check out our featured items!
Paden Phillips Wins Lucas Oil Speedway Mid-Season
Details
Rod End Style: Thru Hole Rod End Thread Pitch: 5/16"-24 Threads: RH Female Material Type: Steel Finish: Natural Hole Diameter: 0.3125" Rod End Attachment: Female Threads Grease Fitting: No Bore Size: 0.3125"
Info
Standard rod ends are for general purpose applications and are a 2-piece design with a low carbon steel body and a hardened steel ball without a race (metal to metal contact).
Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.
Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
Info Inexpensive way to line up your clutch for fast, easy installation. Made of tough nylon
Overall Length: 5.50" Overall Width: 2.25" Overall Height: 1.75" Material Thickness: .19" Centerline of Holes: 3.56" Finish: Black Oxide Material Type: Steel Sold in Quantity: Each Color: Black
This transmission mount is made of steel and is a direct replacement for the rubber mount used on GM manual, TH-350, TH400 and Powerglide transmissions.
Used where typical rubber mount is likely to fail due to flexing. Must be used in conjunction with solid motor mounts
Overall Length: 5.25" Overall Width: 1.990" Overall Height: 1.820" Centerline of Holes: 4.00" Bolt Hole Pattern: 3.75" - 4.50" Hardware Included: Yes Material Type: Urethane Sold in Quantity: Each
Heavy duty Turbo 350 polyurethane replacement for original GM mounts. Features a built-in safety lock to prevent separation. For race or street race use.
Fits "most" GM transmissions having a mount on the tailshaft. The bolt spacing for the tranny mount will accomodate 3-3/4" to 4-1/4" bolt pattern on the transmission. For TH350 application.
Overall Length: 4.00" Overall Width: 4.38" Overall Height: 2.13" Overall Thickness: 0.24" Centerline of Holes: 3.50" Material Type: Steel Finish: Zinc Plated Sold in Quantity: Pair
Steel mounts prevent twist during hard accelerations. Replaces stock upper mounts. Measures 1-11/16" high, 2-1/2" wide.
Notes
Equivalent to many '60s and '70s Chevy mounts. The "span" where they fit over the frame brackets is 2.5". The "reach" from back of mount to center of thru bolt is 1-11/16".
Overall Length: 6.13" Overall Width: 3.25" Overall Height: 2.00" Overall Thickness: 0.18" Vertical Center to Center: 5.08" Horizontal Center to Center: 2.29" Reach: 1.00" Material Type: Steel Finish: Anodized Sold in Quantity: Pair
If your race vehicle requires rigid motor mounts, our solid steel mounts wont let you down. These frame brackets are designed to be used with our steel motor mounts 545-62515. Fits both Small Block and Big Block Chevy.
Same as factory frame brackets from 74-81 Camaro, 73-88 Malibu/Monte Carlo/El Camino, 73-79 Nova, and 76-90 Impala/Caprice.
Item Details
Use with Motor Mount 545-62515.
Same style mounts as used on '74-'81 Camaro, '73-'88 Malibu/Monte Carlo/El Camino, '73-'79 Nova, and '76-'90 Impala
MFG. Part #: 62515 Overall Width: 2.38" Overall Height: 2.50" Material Thickness: 0.19" Reach: 2.31" Hardware Included: No Material Type: Steel Finish: Zinc Plated Sold in Quantity: Pair GTIN Code: 084663625152
If your race vehicle requires rigid motor mounts, our solid steel mounts wont let you down. These engine brackets are designed to be used with our Steel Frame Mounts 545-62630.
Replaces soft, OEM rubber motor mounts Positive, solid mount eliminates engine rotation and torque loss Prevents linkage binding Fits both Small Block and Big Block Chevy
Use with Frame Mount 545-62630.
MFG. Part #: 91618955 Sold in Quantity: Pair
These universal bolt-on side motor mounts are designed for Small Block and Big Block Chevy V8 and 90-degree Chevy V6 engines. They are made from thick steel plate that is zinc plated for corrosion resistance.
These motor mounts stick out 3" from the upper motor mount bolt holes on the block. The center of the slot is 2" from the upper motor mount bolt holes on the block.
Material Thickness: .23" Material Type: Aluminum Finish: Painted Weight: .60 lbs. Sold in Quantity: Pair
Front motor mounts for small block Chevy V8 or 90° V6.
We have the hard core race parts you demand. We specialize in bringing the racer the best race parts available on the market. B2 Race Components is constantly updating and keeping up with the latest in new racing technology.
Follow B2 Race Components on the web!