Shop Departments

Details

Overall Length:
26"
Tube O.D.:
3.5"
Outside Diameter:
3.5"
Material Type:
Steel
Finish:
Natural
Sold in Quantity:
Pair

Notes:

Expanded length is 3.75"

Info

These extensions are designed for use with "T" roadster headers. Professionally cut and mandrel bent extensions slip over 3-1/2" collector pipes. Raw finish mild steel.

This B2 Race Products fuel log slides in and out to fit virtually any Holley style carb. Carburetor fuel line features a three O-ring design to eliminate leakage.

Log features -8AN inlet
3/8" NPT rear port
Aluminum Fuel Bowl Gaskets included

Fitting # 6176157 can be used in conjunction with this item when an 1/8" NPT port is required.

Additional Information:

Adjustable from 8 5/8" Min to 13" Max.
This is far enough to cover most Holley style carburetors with 7/8"-20.
Threaded fuel bowls including Dominator carbs.

| Overall Length: 12.50" | Inlet Fitting: -8 AN | Aluminum | Black Anodized Finish | sealing crush washers 6174018 | 3/8" Gauge Port |

| Gasoline or Alcohol | Paper Filter Element | 10" Overall Length | 2" Overall Diameter | Aluminum Anodized Finish | AN8 |

High flow design offers excellent performance for all racing applications. Black anodized aluminum housing with a paper element.

For use with both alcohol and gasoline.

AN8

| Gasoline or Alcohol | Paper Filter Element | Length 10.00" | Diameter 2.00" | Aluminum Anodized Black |

High flow design offers excellent performance for all racing applications. Black anodized aluminum housing with a paper element.

For use with both alcohol and gasoline.

AN10

| Gasoline or Alcohol | Stainless Steel Mesh | Overall Length 7.88" | Outside Diameter 1.63" | Comes with one O-ring. Not compatible with ethanol (E-85) |

Replacement 10" stainless filter elements to fit our 2" filter bodies. 45 micron. Designed for race car use only. Compatible with gasoline. NOT compatible with ethanol (E85).
NOTE: Spring are not included with filter element and are shown for assembly reference only.

| Gasoline | Paper Filter Element Type | Overall Length 7.75" | Overall Diameter 2.00" | Paper element to fit our 2" x 10" aluminum filter bodies |

This element should not be used with alcohol. Paper elements are so efficient in separating water from fuel that "icing" or blockage can occur with alcohol. Stainless elements should be used with alcohol.

NOTE: Spring and O-rings are not included with filter element and are shown for assembly reference only

| Rear end oiling can mounts flush on rear deck | Aluminum | 24 oz. capacity | 7 1/2" tall, 3" diameter | Mounting flange is 8 1/2" diameter | AN 10 outlet |

Details

Overall Length:
6.29"
Overall Width:
6.00"
Overall Height:
.91"
Gasket(s) Included:
Yes
Hardware Included:
Yes
Material Type:
Aluminum
Finish:
Natural
Sold in Quantity:
Each

Info

Adapts quad pattern to most 4-bolt 2 bbl. pattern. Gaskets and hardware included.

2-barrel patterns on centers:
5-1/8" x 3-7/16"
3-1/2" x 1-7/8"

4-barrel patterns on centers:
5-1/8" x 5-9/16"
4-1/4" x 5-9/16"
3-3/4" x 3-7/8"
Bolt Hole Pattern
2 bbl: (5-1/8" x 3-7/16") & (3-1/2" x 1-7/8"). 4 bbl: (5-1/8" x 5-9/16"), (4-1/4" x 5-9/16"), & (3-3/4" x 3-7/8").

Details

Overall Thickness:
.50"
Bolt Hole Pattern:
5.63" x 5.16"
Hole Diameter:
1.47"
Gasket(s) Included:
No
Hardware Included:
No
Material Type:
Phenolic
Sold in Quantity:
Each

Notes:

Includes dowel pins.

Info

Phenolic material is a type of plastic resin which has excellent insulating properties, so it will keep the fuel in your 4 barrel Holley 4150/4160 cooler for more power. For carbs with 1.467" diameter bores.
Fits Holley 4150/4160 bolt pattern
1/2" tall
4-hole design
1.47" bore
Phenolic construction reduces heat transfer and increases power