Shop Departments

| This zinc plated steel battery tray holds a 10-3/4" x 7" battery. The battery box mounting holes, where it attaches to the vehicle, measure 12-11/16" center to center going side to side. Vertically, the top hole to bottom hole center to center is 5", with mount holes in between at 1" center to center intervals | Zinc Plated | Holds 10-3/4" x 7" Battery | 12 gauge frame and 14 gauge base plate | Overall Length 10.875" | Overall Width 7.250" | Overall Height 6.500" | Steel | Zinc Plated | "Overall" measurments are inside box | Does not include frame mounting bolts |

| 12 volts | 3 Positions |

| High-torque, 1-1/2 HP high output motors and gear reduction drive design spins the engine over faster, with 50% more cranking torque and LESS amp draw than a stock starter! Compact, offset design gives more header and chassis clearance. Perfect for high compression or supercharged Chevy engines |

| Straight mount 6061-T6 aluminum mounting plates work with 153 or 168 tooth flywheels on Chevy V8 or 90° V6. Works on blocks with angle bolt starter flange by drilling and tapping one hole | 180 ft. lbs. |

| 153 or 168 tooth flywheels on Chevy V8 or 90 degree V6. Works on blocks with angle bolt starter flange by drilling and tapping one hole. Comes with bolts, shims and electrical terminal |

| Tooth Count: 9 | Weight: 11.20 lbs. | Hardware Included |

| High torque, high output motors and gear reduction drive design spins the engine over faster, with 50% more cranking torque and LESS amp draw than a stock starter! Compact, offset design gives more header and chassis clearance. Perfect for high compression or supercharged Chevy engines |

| Straight mount 6061-T6 aluminum mounting plates work with 153 or 168 tooth flywheels on Chevy V8 or 90° V6. Works on blocks with angle bolt starter flange by drilling and tapping one hole |
 
| Only 1-1/2 lb. heavier and 1" longer than the 1.4 kW version | From the centerline of the mounting bolt holes to the end of the starter is 7-3/4" | 190 ft. lbs. |

| Aluminum | Overall Length: 5.43" | Overall Width: 6.06" | Overall Height: 3.25" | Overall Thickness: .14" | Centerline of Holes: 2.40" |

| Works with our 910-67440 starter |

| Aluminum heat shields are a must for any Chevy race engine. Prevents the heat of your exhaust from cooking the starter and solenoid. Easy to install |

| Cover fits B2 Race Components starter motor # 91067440 |

| This lightweight high-torque gear reduction starter clears all headers and oil pans where original equipment starters won't. Fits both small block and big block Chevy V8 | No Heat Soak Problems | Clears All Headers | Clears Oil Pans, OE Location | Billet Aluminum Adapter Block | 4.4:1 Gear Reduction Ratio | |200 ft. lbs. of torque | Cranking Power For up to 18:1 Compression | Mounting Bolts Included | Dyno Test Results Included | Weight: 8.0 lbs. |

Race Car Body Bolt Kit, 10 Piece with Clips

| Overall Length: 1.16" | Thread Length: .90" | Wrench Type: Hex | Wrench Size: 7/16" | Kit | Includes (10) bolts with washers and (10) retainers |

| This ten piece kit will allow removal of body panels for cleaning or maintenance while clips stay fastened to bracing brackets or panels |