Congratulations to David Johnson on picking up the win in his new B mod!
All-new website for B2 Racing Components! Shop by departments, brands, and be sure to check out our featured items!
Paden Phillips Wins Lucas Oil Speedway Mid-Season
Details
Overall Length: 4.00" Overall Width: 4.38" Overall Height: 2.13" Overall Thickness: 0.24" Centerline of Holes: 3.50" Material Type: Steel Finish: Zinc Plated Sold in Quantity: Pair
Info
Steel mounts prevent twist during hard accelerations. Replaces stock upper mounts. Measures 1-11/16" high, 2-1/2" wide.
Notes
Equivalent to many '60s and '70s Chevy mounts. The "span" where they fit over the frame brackets is 2.5". The "reach" from back of mount to center of thru bolt is 1-11/16".
Overall Length: 6.13" Overall Width: 3.25" Overall Height: 2.00" Overall Thickness: 0.18" Vertical Center to Center: 5.08" Horizontal Center to Center: 2.29" Reach: 1.00" Material Type: Steel Finish: Anodized Sold in Quantity: Pair
If your race vehicle requires rigid motor mounts, our solid steel mounts wont let you down. These frame brackets are designed to be used with our steel motor mounts 545-62515. Fits both Small Block and Big Block Chevy.
Same as factory frame brackets from 74-81 Camaro, 73-88 Malibu/Monte Carlo/El Camino, 73-79 Nova, and 76-90 Impala/Caprice.
Item Details
Use with Motor Mount 545-62515.
Same style mounts as used on '74-'81 Camaro, '73-'88 Malibu/Monte Carlo/El Camino, '73-'79 Nova, and '76-'90 Impala
MFG. Part #: 62515 Overall Width: 2.38" Overall Height: 2.50" Material Thickness: 0.19" Reach: 2.31" Hardware Included: No Material Type: Steel Finish: Zinc Plated Sold in Quantity: Pair GTIN Code: 084663625152
If your race vehicle requires rigid motor mounts, our solid steel mounts wont let you down. These engine brackets are designed to be used with our Steel Frame Mounts 545-62630.
Replaces soft, OEM rubber motor mounts Positive, solid mount eliminates engine rotation and torque loss Prevents linkage binding Fits both Small Block and Big Block Chevy
Use with Frame Mount 545-62630.
MFG. Part #: 91618955 Sold in Quantity: Pair
These universal bolt-on side motor mounts are designed for Small Block and Big Block Chevy V8 and 90-degree Chevy V6 engines. They are made from thick steel plate that is zinc plated for corrosion resistance.
These motor mounts stick out 3" from the upper motor mount bolt holes on the block. The center of the slot is 2" from the upper motor mount bolt holes on the block.
Material Thickness: .23" Material Type: Aluminum Finish: Painted Weight: .60 lbs. Sold in Quantity: Pair
Front motor mounts for small block Chevy V8 or 90° V6.
MFG. Part #: 916-18956 Overall Thickness: 0.25" Material Type: Steel Finish: Zinc Plated Sold in Quantity: Pair
Two-piece steel rear motor mount for S/B or B/B Chevy and 90° V6. Replaces Howe mount. Notes Fits S/B and B/B Chevy. From center of bottom bell housing bolt hole out to the center of the base mount bolt hole is 4-5/8"
MFG. Part #: 62350-18 Overall Thickness: 1.18" Spline Count: 18 Material Type: Steel Sold in Quantity: Each
Notes:
For 1 piece rear main seal blocks. Info Replacement parts for Falcon racing transmission. One piece rear main seal.
Sold in Quantity: Each
Take control of your Falcon racing transmission with this two-lever shifter assembly. It features two anodized aluminum shift levers, heavy duty rod ends and the necessary hardware for mounting it in your race car.
Shift Lever ONLY: No
Take control of your Falcon racing transmission with this two-lever shifter assembly. It features two anodized aluminum shift levers, heavy duty rod ends and the necessary hardware for setting it up in your race car.
We keep this Brinn Racing Transmissions in stock. With the low rotating weight, internal clutch and smooth shifting, they are hard to beat. Bolts in place of stock GM transmissions. Crank drive flange not included. The input and output shafts are gundrilled for reduced weight Superior dog clutch design provides the most durability and the smoothest shifting available
Low cost - eliminates clutch assembly and throwout bearing assembly Dog clutch and detent design eliminate the need for special shifters Six inch long, 27 tooth output shaft spline that will accept any length yoke SAE 10 tooth input shaft spline Feed line is 1/8"-27 NPT (fitting not included) Low gear ratio: 1.88:1 Reverse gear ratio: 2.29:1 Shafts and gears are cryogenically treated
Order 22070041 for a Brinn Transmission Rebuild Kit. Item Details Standard with Aluminum Case
We have the hard core race parts you demand. We specialize in bringing the racer the best race parts available on the market. B2 Race Components is constantly updating and keeping up with the latest in new racing technology.
Follow B2 Race Components on the web!