Steering

Brand NEW, heat-treated forged Mustang II steel spindle that retains the exact OEM geometry of the 74-78 Mustang II or 74-80 Pinto spindle. IMCA approved.  Works great with our 10" HD Hybrid Rotors as well as with stock rotors, bearings, calipers, ect. Stock 7 5/8" height.  Easy to install.
Specs
From lower ball joint hole to steering hole is 5"
For the ball joint holes: Inside measurement is 5-7/8" and outside is 7-5/8"
Stock 10 deg pin inclination

Vertical mounted power steering reservoir tank.  The top return fitting is the industry standard AN 6 size. Available with AN 8 or AN 10 outlets. These tanks are NOT internally baffled. 
Bracket sold separately. Bracket can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.
Item Details
Mount bracket not included.
Notes
Connect this reservoir to your system using 3/8" hose, used by the majority of OEMs (3/8" = AN6).
Use rubber hose and push-lock fittings, or braided stainless steel lines.

Vertical mounted power steering reservoir tank.  The top return fitting is the industry standard AN 6 size. Available with AN 8 or AN 10 outlets. These tanks are NOT internally baffled. 
Bracket sold separately. Bracket can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.
Item Details
Mount bracket not included.
Notes
Connect this reservoir to your system using 3/8" hose, used by the majority of OEMs (3/8" = AN6).
Use rubber hose and push-lock fittings, or braided stainless steel lines.

Use this handy 3" tall aluminum bracket to mount your power steering reservoir tank or your coolant overflow expansion tank. Can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.
Tank NOT included

These power steering pump brackets are for short water pumps. For mounting Profile or Sweet Pump to small block Chevy V8. Bolt kit included. Anodized purple.
Application
Fits Profile/Sweet type pump and the Gen II type pumps.

These power steering pump brackets are for short water pumps. For mounting Profile or Sweet Pump to small block Chevy V8. Bolt kit included.

With the frequency and pressure of racing power assist being twice that of stock power systems, it’s obvious that stock power steering fluid is not adequate. Would you use 10W30 motor oil in a racing engine? Of course not! That is why KSE has developed a power steering fluid designed to handle the stresses of racing power steering.

The Elixer has a higher viscosity index, anti-foaming, anti-wear, and anti-oxidation capabilities to handle the racing power steering stresses. The Elixer will minimize power assist fade, low-corner- speed assist loss, and decrease heat generation. We also have made the color a “cool” blue to help in identifying oil leak origins.

The Elixer completes the total racing power steering system. When it comes to steering, go with a name you can trust...KSE!

Red Line Oil’s team of chemists and blenders formulate fully-synthetic oils and chemically-advanced additives using only the world’s finest base stocks. This makes Red Line Oil the premium product on the shelf. It’s not designed to be the cheapest – it’s built to be the best. Rather than cutting cost by blending into polyalphaolefin base stock for it’s motor oil, Red Line Oil only uses superior polyester-based products – resulting in lubricants that are extremely stable at high temperatures while providing superior film strength at lower viscosities where more power can be produced.
The world’s top racing team and most discriminating enthusiasts use Red Line Oil products exclusively. There may be a different sponsor on the outside, but chances are it’s Red Line Oil on the inside.
Helps prevent high-temperature steering fade
Helps prevent difficult low-temperature steering
Greater heat resistance
Helps prevent high-temperature boil-over
50% greater high-temperature viscosity
1/5th the high-temperature evaporation
Helps prevent leakage and squealing
1/4th the oxidation of petroleum power steering fluids
Compatible with petroleums and synthetics
Also satisfies API 75W GL-4 gear requirements

Whenever your power steering system is under extreme load, make sure to use Sweet Gold Power Steering Fluid. The performance of this power steering fluid has been tested for years on Sweet Mfg power steering systems.
Helps reduce heat in system
Anti-foam formulation
For use with all Sweet steering components
1 quart